Sew a super cute laptop case that fits the exact dimensions of your laptop! This project takes about an hour to finish and requires only 1 yard of fabric!You’ll need the following materials:I recently moved into a small one bedroom apartment in the city. Small city spaces seem to always pose a problem when it comes to furniture. Luckily, I found the perfect sofa. It’s not quite as small as loveseat, but not as large as a traditional couch, basically a perfect fit.
Ottoman before recovering
Since the size of the apartment didn’t allow for a couch and a loveseat, I decided to use an ottoman as the other seating option for guests. My parents have had the ottoman in the picture on the left for years. It’s faded. It’s drab. It’s seen better days. It’s however without tears, stains, and is structurally sound, so instead of buying a new ottoman decided to recover this one with a fabric that matched my new sofa.
.
.
Making a cover for an ottoman is a very quick and easy project. You’ll need scissors, thread, a sewing machine, fabric (preferably upholstery fabric), an iron, straight pins, and a measuring tape.
..
.
Measure the Ottoman
.Start by measuring the length and width of the top of your ottoman. For example, mine was 38″ by 26,” write these down. Next measure the length and width the long and short sides of the ottoman, you’ll need two of each of these, to make four sides. Add an inch to the measurements to allow for a 1/2 inch seam allowance on each side.
Now lay your fabric out, measure and cut the dimensions noted above. You should have 5 total pieces- 2 short sides, 2 long sides, and the top piece.
..
.
.
1/2" hem along the bottom
Next sew a 1/2″ hem along one long edge of each of the four side pieces. This will give the ottoman cover a finished edge along the floor
..
.
.
.
.
.
Pin right sides together
Next, we’ll sew the side pieces on to the top piece, one at a time. Using the un-hemed edge, pin the side piece to the top piece with right sides facing together. Stitch together with a 1/2″ seam allowance. Repeat for the remaining three sides, making sure fabric is right sides together like shown in the picture.
Once all four sides are attached to the top piece lay it over your Ottoman inside-out (with right side of fabric facing down) to verify it fits.
.
.
.
Pin sides together
.
With the right sides facing towards the ottoman, begin to pin the sides to close the slits along the four corners. Once each of the corners are pinned, remove the cover from the ottoman and sew the edges closed.
Once all sides are sewn together, iron the seams open and flip cover right side out.
That’s it, you’re done! You’ve given an old drab ottoman a fancy new look!
.
.
.
..
Here’s my finished ottoman, even Chauncey loves it!
I happily receive amazing fresh produce each week from Boston Organics. This means fruit, is now my snack of choice. Lately, I have been encountering a fruit eater’s dilemma. Each day I put an apple, pear, or nectarine into my bag for a snack. At lunchtime I discover, much to my disappointment, my notepad has been bumping against my fruit all morning, leaving it badly bruised- many times inedible. For me, this is an utter disappointment at snack time! To combat this reoccurring disappointment caused by manhandled fruit, my mom and I came up with these sock-like drawstring pouches to keep my delicate treats protected from the variety of dangers in my tote bag.
.
>
>
>
>
>
>
>
For anyone looking to crochet a fruit protector of your own, I’m including a free pattern download. And for those wanting to snag a pre-made fruit protector, visit my table at the Ashmont-Peabody Farmer’s Market on July 23rd or check out my Etsy Shop.
